|
 |
 |
|
Flexible and Portable >> Flexible Cable
 |  Type VFD
VARIBLE FREQUENCY DRIVE (VFD) POWER CABLE - 1000 Volt,
XLP Insulation, PVC Jacket, Stranded Copper Conductor, 90°C Dry, 90°C Wet
VFD cables are shielded, flexible motor supply cable for variable speed drives subject to non-linear power distortions. This cable is used to interconnect an AC variable frequency drive or control system, to an AC variable frequency motor. Variable Frequency AC motor drive output cables are subject to a harsh operating environment characterized by high voltage spikes, high noise levels and adverse environmental conditions. VFD cables were designed to overcome the shortcomings of unshielded tray cables, single conductor lead wire installed in conduit or continuously welded armored cable typically used in this application. This cable is constructed with crosslinked polyethylene (XLP) insulation and an UV and oil resistant polyvinyl chloride (PVC) jacket.
For installation in trays, raceways, troughs, channels, ducts, conduit, and by direct burial
Highly flexible tinned copper conductors with high strand counts
Easy to install and able to withstand tight minimum bending radii even during heavy vibration
Disperses voltage spikes, harmonics, and power distortions associated with variable frequency drives
Inner jacket is used to protect the insulation from the braid shield and to lower the capacitive interaction between the shield and power conductors
UV and oil resistant; Heat and moisture resistant
Maximum continuous conductor temperature: 90°C DRY, 90°C WET
| 
 | | Application: AC variable frequency drive or control system, to an AC variable frequency motor |   |
|
Specifications listed are from multiple manufacturers. The items above represent only a portion of the
products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.
|
call today 800.837.2668 <> fax 216.433.7614 |
|
|
|
